ACO Drain

ACO - trench drain leader

 


hh

PowerLok Grates

Grates are manufactured from ductile iron and available in either Slotted or Intercept Heelsaferegistration mark Anti-Slip. Each grate is secured by two PowerLok clips and the unique fit between the trench body edge rail and the grate provide multiple anti-shunt locations to avoid grate movement along the trench.
 

S100K / H100SK grates

Length
mm

Part
No.

Wgt
kg

Wheel Chair High Heel Bike Safe

Spec
Info

Water
Intake

LOAD CLASS G - AS 3996 - 900kN - approximate wheel load 30,000kg

Iron slotted grate
Iron Slotted
500
96082
5.6
tick
cross
tick
cross
PDF
Click here to check the hydraulics for this grate
Iron longitudinal grate
Iron Intercept
Heelsafe® Anti-Slip1
500
141299
6.8
tick
tick
tick
tick
PDF
Click here to check the hydraulics for this grate

S200K / H200SK grates

Length
mm

Part
No.

Wgt
kg

Wheel Chair High Heel Bike Safe

Spec
Info

Water
Intake

LOAD CLASS G - AS 3996 - 900kN - approximate wheel load 30,000kg

Iron slotted grate Iron slotted
500
71976
14.5
cross
cross
tick
cross
PDF
Click here to check the hydraulics for this grate

LOAD CLASS D - AS 3996 - 210kN - approximate wheel load 8,000kg

Iron longitudinal grate

Iron Intercept
Heelsafe® Anti-Slip1
500
142685
11.7
tick
tick
tick
tick
PDF
Click here to check the hydraulics for this grate

S300K / H300SK grates

Length
mm

Part
No.

Wgt
kg

Wheel Chair High Heel Bike Safe

Spec
Info

Water
Intake

LOAD CLASS G - AS 3996 - 900kN - approximate wheel load 30,000kg

Iron slotted grate Iron slotted
500
02445
24.4
cross
cross
tick
cross
PDF
Click here to check the hydraulics for this grate

LOAD CLASS D - AS 3996 - 210kN - approximate wheel load 8,000kg

Iron Longitudinal grate

Iron Intercept
Heelsafe® Anti-Slip1
500
142686
19.2
tick
tick
tick
tick
PDF
Click here to check the hydraulics for this grate


Notes:

1 - Meets ASME A112.6.3 Section 7.12 (American high heel standard).

 

    Trench Grates Specification Information (Spec Info) Sheets

PowerDrain / SlabDrain HSK Series
S100K / H100SK
S200K / H200SK
S300K / H300SK
Iron Intercept Heelsaferegistration mark Anti-Slip Grates (Class D)
PDF
PDF
PDF
Iron Slotted Grates (Class G)
PDF
PDF
PDF

 

   Heelsafe® Anti-Slip grates  

legislative requirementsAt ACO, we believe that pedestrian friendly grates and slip resistance go hand in hand. The grates with the trademark, Heelsafe® Anti-Slip comply to all four specific user requirements; heelsafe, wheelchair and walking cane safe, bicycle safe and are slip rated.

Heelsafe Anti-Slip GrateA slip resistance classification is assigned to these grates. AS 4586 sets out two recognised tests that determine slip resistance: wet pendulum test (P-rating) and oil-wet inclining platform test (R-rating). HB 198 references AS 4586 by specifying the minimum slip resistance ratings dependent on the application.

For more information visit www.heelsafe.com.au
 

   PowerLok - boltless locking system

PowerLok

is a patented, boltless locking system that provides quick fitting and removal of grates. Helps reduce installation/ maintenance time and cost.

QuickLok installation

To open PowerLok, insert tool between rail and PowerLok device.
Rotate tool 90°, PowerLok device should push away from rail.
To close, place hook part of tool into ‘V’ and push towards rail.
         

PowerLok Safety Locking Clip

A plastic locking device is available to avoid accidental unlocking of the PowerLok locking device is available.

 

PowerLok Safety Clip

PowerLok Safety Clip info